Cold room condenser is part of Condensing unit (also called compressor unit) is the most important part of whole cold room system.
A condensing unit typically is a high side assembly of a refrigeration system. It is an assembly of compressor, condenser, fan motor, controls and a mounting plate. It has the function of a heat exchanger to cool down and condense the incoming refrigerant vapor into liquid and a fan for blowing outside air through the heat exchanger section to cool the refrigerant inside.
Condensing units have various designs and come in many sizes ranging from small household appliance units to very large industrial units used in food and manufacturing processes.
Cold room compressor condenser evaporator and condensers for industrial cold freezer room
All the cold room condensing units are equipped with famous brand compressor like Bitzer, Copeland or Tecumseh, vibration absorb, oil separator, air cold condenser, axial fan, oil receiver, dry filter, sight glass, solenoid valve, dual pressure switch, dual pressure gauge, etc.
- New generation of condensing unit with Ozone friendly refrigerants, R404a ,R407c and R507c.
- Designed for ambient temperature of up to 52°C.
- It can be fitted to many compressors, Bitzer, Copeland, Tecumseh compressor.
- High pressure safety cut off with manual reset.
- Axial fan motor, high air flow with low noise.
- Air cooled condensing unit, high performance and convenient.
Over 363 PSI dry nitrogen gas pressure test after completion of the piping circuit. no any leak
